My pinhole camera leaked light for 3 weeks because I skipped one dumb step
I built a foam core pinhole camera back in January and could not figure out why every roll came back with a bright smear down the left edge. I swapped film stocks twice, taped the back shut with black tape, and even rebuilt the whole box from scratch before my friend pointed at the pinhole itself. Turns out the hole I punched was too ragged and let light scatter right through the thin part of the cardboard around it, so I had to line it with a strip of aluminum from a soda can. The whole fix took me about 10 minutes once I knew what it was, but I burned 3 weeks and 4 rolls of film chasing the wrong end of the camera. Now I test every new build by shining a flashlight on the inside in a dark closet before I load anything. Has anyone else had a leak that turned out to be the shutter and not the seams?