Everyone tells new wrenches to set chain tension by feel, but the 2mm rule is what actually saves frames
I keep hearing guys at the shop say just eyeball your chain slack and you'll know when it's right, and I get why, because feel comes with time. But I've seen three cracked rear dropouts in the past two months, all on bikes where the owner swore the slack was fine by feel. The number that matters is 2mm of play at the middle of the chain on a single speed, and about 12 to 15mm on a geared setup. When someone brings in a bike with a noisy drivetrain, I grab the ruler before I grab the wrench, and nine times out of ten they were running way too tight or way too loose. So which side are you on, do you trust your hands or do you keep a ruler on the bench, and has feel ever cost you a part?
Feel has to count for something, right? A ruler won't tell you the chain is dry or a link is stiff, and a seasoned hand catches that stuff way before a number does.